Atmos 540 and 560 Tools

Atmos%20540Atmos repair tools for the model 540 and 560
Sort By:  
atmos 540 repair notes
Repair notes for the Atmos 540. 16 pages of pictures and repair specifications
$9.95
Senson Flag
If you use a Microset then this product is for you.
$5.00
1/4 Buff Stick
This buff stick is excellent for polishing the roller on both all models of Atmos clocks
$9.95
Atmos 540 Repair Stand
Stand for holding and working on the Jaeger LeCoultre 540 and 560 movement
$95.00
Atmos Repair tweezers
These tweezers are designed to hold the roller of a 540 or 560
$9.95
Atmos 540 repair Tools
If you repair the Jaeger LeCoutre Atmos clock model 540 or 560 than this tool is a must have.
$95.00
Atmos chain
Aftermarket Atmos replacement chain. Pulley Not Included
$9.95
Repair those dead bubble levels
$19.95
balance stem clamp
Clamp to hold the balance tube to unscrew pendulum and suspension spring.
$19.95
Atmos suspension spring puller
Atmos suspension wire puller
$9.95
atmos puller
Makes the job of catching and pulling the atmos chain easy
$9.95
atmos 540 repair notes
Atmos 540 Repair Notes (540notes)
If you are planning on working on the Atmos 540 than these repair notes are a must have. These notes give the Atmos repairman the much needed specifications and pictures needed to correctly repair the model 540 Atmos
Repair notes for the Atmos 540. 16 pages of pictures and repair specifications
$9.95
Senson Flag
Sensor Flag (SFMD)
This sensor flag was designed to be easily installed and removed from the Atmos pendulum so you can time out your Atmos clock. This small nylon flag slips onto the bottom of the pendulum and will trip the Microset optical detector. These flags comes 6 to a pack and are attached to their base until needed.
If you use a Microset then this product is for you.
$5.00
1/4 Buff Stick
1/4" wide Leather Buff Stick (BSJLH)
This leather buff stick is excellent for polishing the roller on all models of the Jaeger LeCoultre Atmos clock. The buff stick is 8" ;png and 1/4' wide has a leather face, just add rouge and it is ready to go. The rubber coated handles gives you a sure grip during polishing.
This buff stick is excellent for polishing the roller on both all models of Atmos clocks
$9.95
Atmos 540 Repair Stand
Atmos 540 & 560 Movement Stand (ST540)
If you are working on an Atmos 540 or 560 you will need one of these stands to hold the movement and use to drive of the hour wheel and intermediate wheel.
Stand for holding and working on the Jaeger LeCoultre 540 and 560 movement
$95.00
Atmos Repair tweezers
540 - 560 Roller Tweezers (TW540)
These custom designed speciality tweezer will make holding the roller of the Jaeger LeCoultre Atmos model 540 or 560 easier for polishing. These tweezers are designed to go around the frame of the atmos clock and hold the roller for polishing. Made from high strength yet flexible PLA these tweezers will last for years and will not scratch the roller or rust.
These tweezers are designed to hold the roller of a 540 or 560
$9.95
Atmos 540 repair Tools
Repair Tool #24 for Jaeger LeCoutre Atmos 540 (24JLH)
If you repair the Jaeger LeCoutre Atmos clock model 540 or 560 than this tool is a must have. This tool was made to measure the torque of the mainspring so that it can be wound up to the required specification laid out in the Atmos 540 Repair guide (note 11.6). If the clock is not wound to the proper specification it could either stop, run erratic or rebound from being overwound. Stop the troublesome returns by making sure the clock is wound to the proper specs before it leaves the shop. This tool can also be used when a clock comes into the shop to test the torque on the mainspring to verify the bellow is working correctly and keeping the clock wound correctly. Included in the sale is a FREE copy of the Jaeger LeCoultre 540 Repair Notes and a beautiful box to keep your torque tool safe and clean. The tool head is made from a high impact nylon and the rod is made from stainless steel. The torque tool comes with a 1 year limited warranty.
If you repair the Jaeger LeCoutre Atmos clock model 540 or 560 than this tool is a must have.
$95.00
Atmos chain
Atmos Chain (atmos chain)
Here is a aftermarket replacement chain for all models of the Jaeger LeCoultre Atmos clock. The chain is 3" long and gold tone in color. Pulley Not Included
Aftermarket Atmos replacement chain. Pulley Not Included
$9.95
Atmos Bubble Level Repair Kit (BBkit)
This kit includes a new bubble level, cement and instruction for repairing the bubble level in the 540, 560 and later model 528. If your clock has 3 screws that hold your bubble in then this kit will work on it.
Repair those dead bubble levels
$19.95
balance stem clamp
Atmos Balance Wheel Tube Clamp (StClmp)
Sometimes no matter how hard you try you just can't break that nut loose on the bottom of the Atmos balance. This small clamp will fit around the tube and allow you to clamp it in the vice and break that nut free. It is also good to help unscrew the Atmos suspension spring lower block. Vice and balance tube not included.
Clamp to hold the balance tube to unscrew pendulum and suspension spring.
$19.95
Atmos suspension spring puller
Atmos Suspension Wire Puller (SP01)
Make that job of rethreading a new suspension spring through the balance tube as easy as 1-2-3 . Just insert the Atmos suspension spring puller through the balance tube, fit the tip of the suspension wire in the end, lock in place and pull in through. Work smart not hard. Balance stem not included.
Atmos suspension wire puller
$9.95
atmos puller
Atmos Chain Puller (ChPl)
The Atmos chain puller is made out of super strong music wire that will last for years. Just feed the hook through the spring guide and hock onto the chain, pull it back through and pin it.
Makes the job of catching and pulling the atmos chain easy
$9.95
Per Page      1 - 11 of 11
  • 1